Curing/Ovens

01
Powder Coating Show Wrap-Up

The 2014 Powder Coating Show, which was held in Indianapolis this past September 16-18, is in the rearview mirror now. Let’s take a look back and reminisce (or see what you missed if you were unable to attend)!

[Read the rest of this article...]

30
Proudly Attracting Customers With Powder

When it comes to sheet metal fabrication, SMT, Inc.,located in Raleigh, N.C.,can handle anything. In business since 1969, SMT has grown exponentially over the years, now serving an array of blue-chip clients with products that range in size from a couple of ounces to thousands of pounds.

[Read the rest of this article...]

01

The 2014 Powder Coating Show—the only tradeshow solely dedicated to the powder coating industry in North America—is finally here. Proudly recognized as the leading resource for technical and applied technology forums as well as new product innovations and developments, this is your single best opportunity to meet and interact with the leading professionals from the powder coating industry.

[Read the rest of this article...]

01

Well powder fans, the 2014 PC Summit is history now. It wasn’t exactly my summer vacation; however, I have lots to report on. As expected, we had a band of industry experts expounding their knowledge of the latest technical trends in our industry. And, as always, we had a throng of august technologists attending and bringing networking to an expected crescendo.

[Read the rest of this article...]

01
High End Finish for High-End Wheels

Formula 43 is a dedicated manufacturer of OEM and aftermarket automotive wheels. “Using years of experience in the automotive wheel industry to manufacturer the highest level of modular and mono-block wheels for the racing and sports car industry, Formula 43 is able to produce the latest wheel designs with exclusive updates that result in improved strength, stiffness and weight savings.

[Read the rest of this article...]

01

When it comes to mastering the art of powder coating medium density fiberboard (MDF), persistence has paid off for RadEX, a Canadian custom powder coater. The company began investing in MDF in 1999, and 15 years later is still going strong as pros in its field.

[Read the rest of this article...]

01

It’s nearly that time again, powder coating fans. The 2014 Powder Coating Summit is fast approaching. This year’s event will be held on June 17-18 in Columbus, Ohio. Our prevailing theme as always is “Bringing New 

[Read the rest of this article...]

01
Ask Joe Powder

Dear Joe,
I have some brake calipers that I powder coated, and I would like to add lettering and then add a clear powder coat and put in the oven and bake it. I would like to know of any material (vinyl, decal or anything) that can withstand 400°F to be powder coated over.

[Read the rest of this article...]

01

I’m working on a marketing research project and have a question regarding powder coatings used on MDF (medium density fiberboard). Do they always have to be UV-cured?

[Read the rest of this article...]

01
Convection ovens use heated air to cause the powder to melt, flow, create a film, and finally to cure on your parts. The key to convection oven tec...

[Read the rest of this article...]

Posted in: Curing/Ovens
Page 9 of 10First   Previous   4  5  6  7  8  [9]  10  Next   Last   

Product Showcase - New

HtmlNoArticles