Curing/Ovens

01
High End Finish for High-End Wheels

Formula 43 is a dedicated manufacturer of OEM and aftermarket automotive wheels. “Using years of experience in the automotive wheel industry to manufacturer the highest level of modular and mono-block wheels for the racing and sports car industry, Formula 43 is able to produce the latest wheel designs with exclusive updates that result in improved strength, stiffness and weight savings.

[Read the rest of this article...]

01

When it comes to mastering the art of powder coating medium density fiberboard (MDF), persistence has paid off for RadEX, a Canadian custom powder coater. The company began investing in MDF in 1999, and 15 years later is still going strong as pros in its field.

[Read the rest of this article...]

01

It’s nearly that time again, powder coating fans. The 2014 Powder Coating Summit is fast approaching. This year’s event will be held on June 17-18 in Columbus, Ohio. Our prevailing theme as always is “Bringing New 

[Read the rest of this article...]

01
Ask Joe Powder

Dear Joe,
I have some brake calipers that I powder coated, and I would like to add lettering and then add a clear powder coat and put in the oven and bake it. I would like to know of any material (vinyl, decal or anything) that can withstand 400°F to be powder coated over.

[Read the rest of this article...]

01

I’m working on a marketing research project and have a question regarding powder coatings used on MDF (medium density fiberboard). Do they always have to be UV-cured?

[Read the rest of this article...]

01
Convection ovens use heated air to cause the powder to melt, flow, create a film, and finally to cure on your parts. The key to convection oven tec...

[Read the rest of this article...]

Posted in: Curing/Ovens
01

Often used to cure powder coatings, combination ovens—ovens that employ both infrared and convection— usually connect infrared and convection heating zones together in series: that is, a zone of infrared followed by a zone of convection. This is logical given that when curing powder coatings, the objective is first to fuse the coating, then cure it.

[Read the rest of this article...]

Posted in: Curing/Ovens
01
Iron Maker Accentuates Its Finish With Powder

When Cambridge, MN-based Accent Ornamental Iron installed a powder coating system to finish its intricate iron designs, the fabricator was able to not only complete its own projects rather than subcontracting (jobbing) them out, but also start a new business as a custom coater for other shops.

[Read the rest of this article...]

01

Rainier’s newly acquired screen and awning production facility was designed so the mill-finish inventory was stored, cut to order, cleaned, and powder coated upstairs. The final assembly and shipping functions 

[Read the rest of this article...]

01
Proprietary low cure powders and IR technology has enabled Decoral licensees to powder coat and decorate MDF, which has created breakthroughs in the cabinet and display industries.

[Read the rest of this article...]

Page 10 of 10First   Previous   5  6  7  8  9  [10]  Next   Last   

Product Showcase - New

HtmlNoArticles